Placepoint

Placepoint AI

What took a working day,
takes seven minutes.

The figures come from one site assessment, done with one question in Claude. Placepoint AI connects to Claude, ChatGPT, Microsoft Copilot Studio and other tools over MCP, and every Fusion user has Agent in Fusion. You get an answer, table, map or report, with a source for every number.

Book a demoSetup in docs
The Agent in Placepoint Fusion maps housing projects at Fornebu, with a table of the properties and the map alongside

MCP servers

Illustration

  • Placepoint MCPNorway · Reads
  • Placepoint Dataset MCPYour data · Reads and writes
  • Combify MCPSweden · Reads

Works in

  • Claude Desktop
  • Claude Code
  • Cowork
  • Microsoft Copilot Studio
  • ChatGPT
Also inside Fusion as the Agent

Site assessment

One site assessment. A full working day, 40 minutes, or seven minutes.

Same seven steps, same clock. See who is done before the coffee goes cold.

Without Placepoint
7 h 20 min
Placepoint Fusion
40 min
Placepoint AI
7 min

Placepoint AI: Done 08:07. The rest of the day is yours.

The times without Placepoint are Placepoint's estimate for an experienced developer. The Placepoint AI time includes reading the answer. The plot and the answers are an example.

Time15:20
7 h 20 min vs 40 min vs 7 min
Without PlacepointMaps, registers and PDFs
Seeiendom seeiendom.kartverket.no
Land Registry the land register
Plan portal the municipality's map portal
Provisions.pdf 41 pages
NVE Atlas atlas.nve.no
Brønnøysund Register Centre brreg.no
Memo.docx Word
7 h 20 min15 sources checked, 7 tabs
Placepoint FusionThe property panel in app.placepoint.no
Property panel
Owners
Land register
Plan
Provisions
Risk
Neighbors
Report
Done 08:40
40 minseven tabs in one panel
Placepoint AIOne question in Claude
Do a site assessment of the plot I have selected: owner, land register, plan, provisions, risk and neighbors. Write a memo.
Title holder: Tomta AS, 100 % owned by Utbygger Holding ASSource: Cadastre, Brønnøysund Register Centre
Last sold 2019, NOK 18.5 million. Two encumbrances, no restraint on disposalSource: Land register
Master plan: building and development, future housing area B4Source: Municipal plan register
Plan 2021-04: 35 % site coverage, four stories, phasing requirement for a pedestrian and cycle pathSource: Plan register, plan document pp. 7 and 12
Outside flood zones. Quick clay caution: yes, ground survey requiredSource: NVE, NGU
Eleven neighboring properties, three with the same owner. Two building cases in the last yearSource: Cadastre, case records
Site assessment compiled, 2 pages, source per fieldSource: Placepoint
Done 08:07. The rest of the day is yours.
7 minsource per field

The times without Placepoint are Placepoint's estimate for an experienced developer. The Placepoint AI time includes reading the answer. The plot and the answers are an example.

Minutes per step
StepWithout PlacepointPlacepoint FusionPlacepoint AI
Owner and ownership chain
30 min
2 min
0.5 min
Land register and transactions
20 min
2 min
0.5 min
Municipal master plan and purpose
45 min
3 min
0.5 min
Zoning plan and provisions
2 h 30 min
10 min
2 min
Hazards and environment
1 h
5 min
1 min
Neighbors and owners
45 min
3 min
0.5 min
Memo
1 h 30 min
15 min
2 min
Whole day7 h 20 min40 min7 min
Develop: Zoning, volume, sequencing requirements and risk

Three servers, one conversation

Norway, your datasets, and Sweden

NorwayReads

Placepoint MCP

The registers and map layers for all of Norway: matrikkel (cadastre), land register, companies, land-use plans, risk, travel time and historical aerial photos. Around 2,700 map layers from around 250 map services.

Read-only. Nothing you ask changes anything in Placepoint.

Typical question

“Who owns Storgata 1 in Oslo, and what is registered on the property?”

  • Land register extract and encumbrances for one property or a whole area
  • The ownership chain from the ultimate owner down to every subsidiary
  • Zoning, with the provisions and plan description read, not just listed
  • Climate and nature risk, with a traffic light for each theme
  • Due diligence, credit and portfolio reports as PDF

~/project $ claude mcp add --transport http placepoint <serveradresse>

✓ Added HTTP MCP server placepoint

~/project $ claude

>Who owns Storgata 1 in Oslo, and what is registered on the property?

placepoint· reads

The server addresses and the steps are in the docs. Setup in Claude takes a few minutes.

Two ways in

The same data, in the tool you use or right in Fusion

In Claude, Copilot Studio and ChatGPT

Placepoint AI

  • Suits long analyses and work that combines Placepoint with other sources.
  • Delivers reports as PDF, dashboards and presentations.
  • Needs an AI seat and a few minutes of setup.
How to install

Inside Placepoint Fusion

Agent in Fusion

  • No setup: every Fusion user has the Agent in the left-hand menu.
  • Moves the map, turns on map layers and opens the property panel on the match.
  • The first five answers with data are free; after that you need an AI seat. Answers from the documentation are always free.
Open FusionRead about the Agent

AI and agents

Ask Claude, get answers from Placepoint

Connect Placepoint to the AI tool you already use, via MCP in ChatGPT, Copilot, Claude and more, and get answers drawn from the same data as Fusion. One question, four lookups, one answer.

Set up Placepoint AIAbout Placepoint AI

Real answers from Placepoint AI

Claude Desktop and Claude Code

Who owns Tordenskiolds gate 2 in Oslo, what is the site zoned for, and who rents there?

  • placepoint.properties
  • placepoint.owners
  • placepoint.zoningplans
  • placepoint.tenants
Placepoint AI
Owner
Tordenskioldsgate 2 Oslo AS, owned by SpareBank 1 Forsikring, part of the SpareBank 1 group. A 5,867 m² office building (usable floor area), BREEAM Very Good.
Zoning
Retail, office and food service under plan S-3937 from 2002. Up to 8,500 m² usable floor area, with shops or food service on the ground floor facing the street.
Tenants
167 active companies with 340 employees at the address, most in software and IT. The largest are Glint Solar, Labrador CMS and Vaskeladden.

Placepoint AI · Matrikkelen, Brønnøysundregistrene and Plan- og bygningsetaten in Oslo, retrieved 16 October 2026

What it is used for today

Three jobs Placepoint AI does

  1. 01

    Due diligence on an address

    “Who owns it, what is it zoned for, who rents, and what is registered?” One question, four lookups, one answer with sources.

  2. 02

    A whole street at once

    “Check all of John Colletts allé, where can you build new, make a report” produced a 15-page report, with zoning maps and a summary per property.

  3. 03

    From search to map layer

    The agent finds all logistics properties over 10,000 m² in a municipality and saves them as a dataset you see on the map the next time you open the project.

Cover
Summary with key figures by zone
Zoning map with land-use areas
Follow-up question: plot division in Bergsalléen
1 / 4

Example

The report the agent made for John Colletts allé

One prompt. The agent went through every property on the street, read the zoning provisions and the plan description, and delivered 15 pages with zoning maps, a hazard sweep and summaries. Source and date on every number.

More examples in the docs

Access

Requires a Placepoint AI licence

Setup in docs

  • One AI seat per user

    We set up the licence with you, for the whole organisation or for named people. The same seat gives data answers in the Agent.

  • Same user account as in Fusion

    You log in with your Placepoint user account. Your access follows the projects you have.

  • Set up in minutes

    The server addresses and the steps for Claude, Copilot Studio and ChatGPT are in the docs.

    How to install

  • Developing fast

    New tools and sources are added all the time.

    See the updates

Privacy. Placepoint AI does not share information about private persons who own property. We remove personal names and national identity numbers before the data reaches the model, and private persons are shown as “Private person”.

Frequently asked questions

What we get asked

Which AI models do you support?

Placepoint AI is built for and tested with Claude from Anthropic, in Claude Desktop, Claude Code and Cowork. The servers follow the MCP standard and also work in Microsoft Copilot Studio, ChatGPT, Codex, Cursor and Perplexity. We recommend Claude, because that is where we test every new feature first. Inside Fusion it is called the Agent, and every Fusion user has it.

What is MCP?

MCP (Model Context Protocol) is an open standard that lets an AI assistant use tools and data sources. With Placepoint AI connected, Claude looks things up in the registers while you talk, instead of guessing from what the model remembers.

What does Placepoint AI cost?

Placepoint AI needs a licence with one AI seat per user, for the whole organisation or for named people. We set up the licence with you, and the same seat gives data answers in the Agent. Without a seat, the Agent gives five free answers with data. Contact us for pricing.

Does Placepoint AI change any of my data?

Placepoint MCP and Combify MCP only read. Placepoint Dataset MCP can create datasets, add rows and columns and style the map layer, but only in the projects you have access to in Fusion.

What data do I get?

The registers and map layers for all of Norway: cadastre, land register, companies, zoning plans, risk and travel time. Plus your datasets in Fusion and Swedish property from Combify. Every dataset and who supplies it is listed under Data and sources in the docs.

Can I try it without Fusion?

No. Placepoint AI uses your Placepoint user account, so you need a user in Fusion. Book a demo and we'll show it on an address you choose.

See what the Agent can do on a property you know.We run the demo on an address you choose.

Book a demoAbout the Placepoint API